Features/Discovery

Alerts (ALERT)

ALERT

ALERT watches the stocks you choose and tells you when something happens: a price line is crossed, a stock makes a big move, volume surges, RSI gets extreme, earnings come close, an insider buys, or the DCF value sits well above the price. Alerts are saved in your browser and checked while the terminal is open. No account is needed.

Try it in the terminal

ALERT
Open the alert screen. The ticker box starts with the last stock you looked at.
NVDA
Look at a stock first, then open ALERT to start an alert on it.
AAPL TA
Check RSI and other technicals before choosing an RSI alert.
AAPL DCF
See the DCF value that the DCF upside alert compares with the price.

What it shows

The ALERT screen has four parts: a form to add an alert, a table of your alerts with their current state, a list of recent alerts that fired, and a panel on the right that shows how you are told.

When an alert fires, a pop-up appears in the bottom right corner of the terminal. It names the stock and says what happened, with buttons to open the stock or manage your alerts. It disappears after 15 seconds, and at most four show at once.

How to open it

Type ALERT in the command line and press Enter, or click Alerts in the top bar. On narrower windows the top-bar button is hidden, but the command always works. The ticker box is filled with the last stock you looked at. You can change it.

Adding an alert

Enter a ticker, choose 'Alert me when', fill in the number if the alert needs one, and press Add alert. If you leave the number empty, the suggested value shown in the box is used. A line under the form describes exactly what the alert will do. The ten kinds are:

  • Price rises above: the price reaches your price or higher.
  • Price falls below: the price reaches your price or lower.
  • Big move today: the stock is up or down by at least your percentage for the day (0.5 to 100, default 5).
  • Unusual volume: today's volume reaches your multiple of its 20-day average (1.1 to 50 times, default 2). While the session is still running, volume so far is scaled up to a full day, so a busy morning counts as busy.
  • RSI crosses above 70: the 14-day RSI crosses into overbought. RSI is a 0 to 100 gauge of recent buying versus selling. See TA.
  • RSI crosses below 30: the 14-day RSI crosses into oversold.
  • Earnings coming up: the next earnings date is within your number of days (0 to 90, default 7).
  • Insider buys shares: an insider has bought on the open market within your number of days (1 to 365, default 30).
  • DCF upside above: the DCF value is at least your percentage above the price (1 to 500, default 25). It uses the default DCF value, the same as the DCF screen.
  • Upcoming catalyst: earnings within your number of days (1 to 90, default 7), or a new 8-K filing. An 8-K is a form companies file to report a material event such as a deal or a management change.

You can have up to 50 alerts, covering at most 40 different stocks.

Reading the alert table

  • Ticker: click to open the stock.
  • Alert: what the alert checks.
  • Now: the latest reading, for example the current price against your line. It shows in amber when the condition is currently met. 'Paused' means you paused it. 'Checking' means the first check is running.
  • Last fired: when it last notified you.
  • Pause or Resume, and Delete. A paused alert never fires.

Recent alerts lists the last 50 times an alert fired, with the time and message. Clear empties the list.

How it works

Checking. While the terminal is open, quotes for your alert stocks are refreshed every 30 seconds. Slower data (daily price bars for volume and RSI, earnings dates, insider trades, company financials for the DCF and 8-K filings) is fetched one request at a time, paced to stay inside the data provider's limits, and refreshed every 15 minutes. Only the data your alerts need is fetched.

Two ways of firing. Level alerts are price, big move, volume, RSI and DCF. They fire when the condition becomes true, and then wait until it is false again before they can fire again. This stops a price that stays above your line from alerting every 30 seconds. A price or volume alert that is already true when you create it fires on its first check. The two RSI alerts are different: if RSI is already past the level when the alert is first checked, they wait for it to come back and then cross.

Event alerts are earnings, insider buys and the catalyst alert. They fire once for each event. For example, an earnings alert fires once for each earnings date, and an insider-buy alert fires once for each purchase.

Details. Price alerts use the latest quote. A Big move alert counts the move since the last close, and it does not fire before the stock has traded that day (on weekends and holidays it reads 'hasn't traded yet today'). RSI alerts use the 14-day RSI. Insider-buy alerts count only open-market purchases, not sales or awards. If there is no earnings date announced, an earnings alert stays quiet.

Several tabs. If you have the terminal open in more than one browser tab, only one of them checks alerts, so each alert fires once. The others show 'Checked in your other terminal tab'. If that tab closes, another takes over.

How you are told

  • In the terminal: the pop-up in the corner, and a line in Recent alerts. This is always on.
  • Browser notifications: if you press Turn on notifications and allow them, the browser shows a system notification as well, even if the terminal is in a background tab. The tab must stay open. Click the notification to go to the stock. If you blocked notifications in your browser's settings, allow them there.
  • Email and phone push: shown on the screen as coming next. They are not available yet. For now, an alert can only reach you while the terminal is open in a browser.

Limits and good to know

  • Alerts are saved in this browser on this device. They are not synced to your QuoteDaddy account or to other devices, and clearing your browser data removes them.
  • Alerts are checked only while the terminal is open in a browser tab. Nothing is watched when it is closed.
  • Quotes are checked every 30 seconds, and other data every 15 minutes, so an alert is not instant. Prices can be delayed.
  • A stock needs a working quote for price, big move and DCF alerts. If its data cannot be loaded, the alert stays at 'Checking'.
  • Alerts for event types (earnings, insider buys, 8-K filings) depend on the data being up to date, and can be late.

Alerts are information, not investment advice.

Tips

  • Set a price line at a level you decided in advance, such as a support level you saw on the chart (GP).
  • Combine a Price falls below alert with an Earnings coming up alert on the same stock.
  • Use Pause rather than Delete if you want to keep an alert for later.
  • Turn on browser notifications and pin the terminal tab, so you do not miss pop-ups.

Questions about Alerts (ALERT)

Do I need an account for alerts?

No. Alerts work without signing in. They are saved in your browser. Signing in does not move them to your account yet.

Can I get alerts by email or on my phone?

Not yet. The screen lists email and phone push as coming next. Today an alert shows as a pop-up in the terminal, and as a browser notification if you allow them, but only while the terminal is open.

Why did my alert not fire when the terminal was closed?

Alerts are checked by the terminal itself, in your browser. When the tab is closed, nothing checks. Leave the terminal open in a tab, which can be in the background, to keep watching.

Why did my price alert fire straight away?

Price, big move, volume and DCF alerts fire as soon as the condition is true at the first check. If the price was already above your line, it fires at once. Then it waits until the price drops back below before it can fire again. RSI alerts are different: they wait for a real crossing.

How quickly will I be told?

Quotes are checked every 30 seconds. Volume, RSI, earnings, insider, DCF and filing data are refreshed every 15 minutes. Prices may also be delayed by the data provider.

Will an alert keep firing every time it is true?

No. A level alert fires once when the condition becomes true and re-arms only after it is false again. An event alert fires once per event.

Why does a row say it is checked in another terminal tab?

When the terminal is open in several tabs, only one tab does the checking so each alert fires just once. The other tabs show that message.

Is an alert advice to buy or sell?

No. An alert only reports that a condition you chose has been met. The terminal is information, not investment advice.